2018年6月18日星期一

一番短い時間でVMware 2V0-622D試験を通りたいですか?

KtestのVMwareの2V0-622D問題集を買う前に、一部の問題と解答を無料に試用することができます。そうすると、KtestのVMwareの2V0-622Dトレーニング資料の品質をよく知っています。KtestのVCP6.5-DCV資格の2V0-622D問題集は絶対あなたの最良の選択です。この情報の時代には、IT業界にとても注目され、この強い情報技術業界にIT人材が得難いです。こうしてVCP6.5-DCV資格認定試験がとても重要になります。でも、この試験がとても難しくてIT者になりたい方が障害になっています。

Ktestは客様の要求を満たせていい評判をうけいたします。たくさんのひとは弊社の商品を使って、VMware Certified Professional 6.5 – Data Center Virtualization Delta Exam試験に順調に合格しました。
Share some VCP6.5-DCV 2V0-622D exam questions and answers below.
Which are two vCenter Server two-factor authentication methods? (Choose two.) 
A. RSA SecurID 
B. Smart Card 
C. SAML 
D. Symantec VIP 
Answer: A,B

An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack. 
Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.) 
A. Virtual SAN traffic 
B. NFS traffic 
C. vMotion traffic 
D. vSphere HA traffic 
E. Fault Tolerance logging traffic 
Answer: C,D,E

Which is the predefined user name when publishing a Content Library? 
A. admin 
B. root 
C. administrator 
D. vcsp 
Answer: D

An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this? 
A. vSphere 6.5 does not support manual UNMAP. 
B. The manual UNMAP operation has been moved to thevSphere web client. 
C. The VASA version is use is incompatible. 
D. UNMAP is automated for VMFS6. 
Answer: D

A domain user is able to successfully log into the vSphere Web Client, but notices that the vCenter Server system does not appear in the inventory. 
Which is the cause of this situation? 
A. The Service Control Agent service is not running. 
B. The vCenter Server does not have anyhosts added to inventory yet. 
C. The domain user has read-only permissions on vCenter Server. 
D. The domain user does not have vCenter Server permissions. 
Answer: D


Ktestのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された98%の成功率を持っている資料です。Ktestを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。何でも上昇しているこの時代に、自分の制限を突破したくないのですか。給料を倍増させることも不可能ではないです。VMwareの2V0-622D試験参考書試験に合格したら、あなたは夢を実現することができます。Ktestはあなたの最高のトレーニング資料を提供して、98%の合格率を保証します。これは本当のことです。疑いなくすぐKtestのVMwareのVMware Certified Professional 6.5 – Data Center Virtualization Delta Exam試験参考書を購入しましょう。

最近、受験者はやっぱりVMwareVCP6.5-DCV資格2V0-622D試験問題集対応資格認証試験を通じての大きい難度が悩んでいますか? 受験者はまだVCP6.5-DCV認定資格に合格するために一生懸命繰り返していますか? 一番短い時間で2V0-622D試験を通りたいですか?KtestのVMwareの2V0-622D試験参考書は今までがないIT認証のトレーニング資料ですから、Ktest試験参考書を利用したら、勉強者のキャリアは順調に進むことができるようになります。Ktest会社が提供したVMware Certified Professional 6.5 – Data Center Virtualization Delta Exam試験問題集は経験豊富なIT専門家の過去の試験より努力研究の出題傾向があるんです。それもほとんどの受験生はKtestを選んだ理由です。Ktestはいつまでも受験生のニーズに注目していて、できるだけ皆様のニーズを満たします。

VMwareのVCP6.5-DCV資格を受けてVCP6.5-DCV資格を取得したいですか。Ktestはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお大切なのは、自分に相応しい効率的なツールを選択することです。Ktestの2V0-622D試験問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくKtestのウェブサイトをクリックしてもっと多くの情報を読んでください。Ktestは優れたIT情報のソースを提供するサイトです。Ktestで、あなたの試験のためのテクニックと勉強資料を見つけることができます。KtestのVMwareの2V0-622D試験問題集は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。Ktestに会ったら、最高のトレーニング資料を見つけました。KtestのVMwareの2V0-622D試験問題集を持っていたら、VMware Certified Professional 6.5 – Data Center Virtualization Delta Exam試験に対する充分の準備がありますから、安心に利用したください。

2018年5月24日星期四

気楽に一回でOracle 1Z0-052試験に合格したいですか

KtestのOracle 11g 資格 1Z0-052問題集はIT専門家からすべての問題と解答を確認して、正解率が98%になります。Oracle 11g 資格1Z0-052問題集は実験問題、多肢選択問題、単项の选択問題、ドラッグ アンド ドロップ問題及び穴埋め問題を提供しております。

人性化のサービス、よくお客様の立場から考えて、もっといいサービスを提供することはktestの信念です。 お客様がOracle 11g資格 1Z0-052問題集を購入する前に無料でOracle 1Z0-052問題集のサンプルを試用することができます。Oracle 1Z0-052試験問題は定期的にアップデートしています。

下記はOracle 11g 資格1Z0-052問題集の部分デモをご参考ください。

1.The instance abnormally terminates because of a power outage.
Which statement is true about redo log files during instance recovery?
A. Inactive and current redo log files are required to accomplish recovery
B. Online and archived redo files are required to accomplish instance recovery
C. All redo log entries after the last checkpoint are applied from redo log files to data files
D. All redo log entries recorded in the current log file until the checkpoint position are applied to data files
Answer: C

2.Examine the command:
SQL>ALTER USR skd ACCOUNT LOCK;
Which two statements are true after the command is executed.? (Choose two.)
A. The SKD user cannot log in to the database instance
B. The objects owned by the SKD user are not accessible to any user
C. The other users can access the objects owned by the SKD user, on which they have access
D. The password for the SKD user expires and the user is forced to change the password at the next login
Answer: AC

3.For which database operation would you need the database to be in the MOUNT state?
A. Renaming the control files
B. Re-creating the control files
C. Dropping a user in your database
D. Dropping a tablespace in your database
E. Configuring the database instance to operate in the ARCHIVELOG or NOARCHIVELOG modes
Answer: E

4.The job to gather optimizer statistics for objects runs as part of the automatic maintenance window in
your database instance. At a certain point of time, the maintenance window closes before the statistics
are gathered for all objects.
Which statement is true in this scenario?
A. The statistics collection continues until all objects are processed.
B. The job is terminated and the statistics collected are restored to a time before the job started.
C. This produces an error and the statistics collected are locked until the next time that the maintenance
window is opened.
D. The job is terminated and the statistics for the remaining objects are collected the next time that the
maintenance window is opened.
Answer: D

5.You want to move all objects of the APPS user in the test database to the DB_USR schema of the
production database.
Which option of IMPDP would you use to accomplish this task?
A. FULL
B. SCHEMAS
C. TRANSFORM
D. REMAP_SCHEMA
E. REMAP_TABLESPACE
Answer: D

6.You executed the following command to create a password file in the database server:
$ orapwd file = orapworcl entries = 5 ignorecase=N
Which statement describes the purpose of the above password file?
A. It records usernames and passwords of users when granted the DBA role
B. It contains usernames and passwords of users for whom auditing is enabled
C. It is used by Oracle to authenticate users for remote database administrator
D. It records usernames and passwords of all users when they are added to OSDBA or OSOPER
operating groups
Answer: C

7.Which two statements are true regarding the MRKT tablespace? (Choose two.)
SQL> CREATE BIGFILE TABLESPACE MRKT
2 DATAFILE '/u01/app/oracle/oradata/orcl/mrkt.dbf' size 10M LOGGING 3 EXTENT MANAGEMENT
LOCAL SEGMENT SPACE MANAGEMENT AUTO; Tablespace created.
SQL> ALTER DATABASE DEFAULT TABLESPACE MRKT;
Database altered.
A. No more data files can be added to the tablespace.
B. Segment space is managed by free lists in the tablespace.
C. A user created without being assigned a default tablespace uses this tablespace.
D. The tablespace can be dropped with the current setting with segments present in it.
Answer: AC

8.After performing a clean shut down of the database instance for maintenance, you mount the database
and then execute a command to open the database:
SQL> ALTER DATABASE OPEN;
Which two statements are true? (Choose two.)
A. The online redo log files and online data files are opened
B. All the online data files headers are checked for consistency
C. Instance recovery is performed before opening the database
D. The path and existence of all the log file members are checked
Answer: AB

9.Examine the command that is used to create a table:
SQL> CREATE TABLE orders (
oid NUMBER(6) PRIMARY KEY,
odate DATE,
ccode NUMBER (6),
oamt NUMBER(10,2)
) TABLESPACE users;
Which two statements are true about the effect of the above command? (Choose two.)
A. A CHECK constraint is created on the OID column.
B. A NOT NULL constraint is created on the OID column.
C. The ORDERS table is the only object created in the USERS tablespace.
D. The ORDERS table and a unique index are created in the USERS tablespace.
E. The ORDERS table is created in the USERS tablespace and a unique index is created on the OID
column in the SYSTEM tablespace.
Answer: BD

10.Which two statements are true about Shared SQL Area and Private SQL Area? (Choose two.)
A. Shared SQL Area will be allocated in the shared pool
B. Shared SQL Area will be allocated when a session starts
C. Shared SQL Area will be allocated in the large pool always
D. The whole of Private SQL Area will be allocated in the Program Global Area (PGA) always
E. Shared SQL Area and Private SQL Area will be allocated in the PGA or large pool
F. The number of Private SQL Area allocations is dependent on the OPEN_CURSORS parameter
Answer: AF

11.Which three statements are correct about temporary tables? (Choose three.)
A. Indexes and views can be created on temporary tables
B. Both the data and structure of temporary tables can be exported
C. Temporary tables are always created in a user's temporary tablespace
D. The data inserted into a temporary table in a session is available to other sessions
E. Data Manipulation Language (DML) locks are never acquired on the data of temporary tables
Answer: ACE

12.Which two kinds of failures make the Data Recovery Advisor (DRA) generate a manual checklist?
(Choose two.)
A. Failure when no standby database is configured
B. Failure because a data file is renamed accidentally
C. Failure that requires no archive logs to be applied for recovery
D. Failure due to loss of connectivity-for example, an unplugged disk cable
Answer: BD


あなたの1Z0-052 pdfの質問に有効です、私は通過後の1Z0-052の練習の質問と同様にすべてのqと読んだことがあります。私はあなたの自由な1Z0-052ソフトウェアのように、それは私に触れて、実際の試験環境を助けました。ktestに感謝します。









2018年4月25日星期三

2018 最新 Cisco CCNA Security 210-260参考書

最新のCisco CCNA Security 210-260学習材料を選ぶのは絶対正しいことです。時は金なり社会に時間を無駄しないようによいツルを探し出されるのはみんなの希望です。
ktestのCisco CCNA Security 210-260問題集は非常に大きな改善を有するように、あなたが簡単に明確かつ優れた選択肢で提供します。
ktestのCisco CCNA Security 210-260参考書を使用すると、すぐにあなたが欲しい証明書を取得することができます。
ktestのCisco CCNA Security 210-260勉強資料を使用することを選択した候補者の多くは、一度だけのためのIT認定試験に合格しています。
最新のCisco CCNA Security 資格210-260認定試験は真実の試験問題にもっとも近くて比較的に全面的です。
弊社の 210-260勉強材料を通して、初めにCisco CCNA Security認証を受けるあなたは、気楽に試験に合格すことができます。


試験番号 210-260J
関連資格 CCNA Security
試験時間 90 分 (60 - 70 問)
試験言語 日本語、英語
試験登録 Pearson VUE
試験ポリシー 認定試験ポリシーおよび要件
試験チュートリアル 出題形式


210-260試験では、セキュアなネットワーク インフラストラクチャ、セキュリティの中心概念の理解、セキュアなアクセスの管理、VPN 暗号化、ファイアウォール、侵入防御、Web と電子メールのコンテンツ セキュリティ、およびエンドポイント セキュリティに関する受験者の知識をテストします。次の内容が含まれます。

SIEM テクノロジー
クラウド & バーチャル ネットワーク トポロジ
BYOD, Bring Your Own Device
Identity Services Engine (ISE)
802.1x 認証
Cisco FirePOWER 次世代侵入防御システム(NGIPS) (ドメイン 6.0)
マルウェア対策/Cisco Advanced Malware Protection
データやデバイスの完全性、機密性、および可用性を維持するためのセキュアなネットワークのインストール、トラブルシューティング、および監視に関するスキルを評価します。


Which two services define cloud networks? (Choose two.)
A. Infrastructure as a Service
B. Platform as a Service
C. Security as a Service
D. Compute as a Service
E. Tenancy as a Service
Answer: A,B

In which two situations should you use out-of-band management? (Choose two.)
A. when a network device fails to forward packets
B. when you require ROMMON access
C. when management applications need concurrent access to the device
D. when you require administrator access from multiple locations
E. when the control plane fails to respond
Answer: A,B

In which three ways does the TACACS protocol differ from RADIUS? (Choose three.)
A. TACACS uses TCP to communicate with the NAS.
B. TACACS can encrypt the entire packet that is sent to the NAS.
C. TACACS supports per-command authorization.
D. TACACS authenticates and authorizes simultaneously, causing fewer packets to be transmitted.
E. TACACS uses UDP to communicate with the NAS.
F. TACACS encrypts only the password field in an authentication packet.
Answer: A,B,C

According to Cisco best practices, which three protocols should the default ACL allow on an access port to enable wired BYOD devices to supply valid credentials and connect to the network? (Choose three.)
A. BOOTP
B. TFTP
C. DNS
D. MAB
E. HTTP
F. 802.1x
Answer: A,B,C

Which two next-generation encryption algorithms does Cisco recommend? (Choose two.)
A. AES
B. 3DES
C. DES
D. MD5
E. DH-1024
F. SHA-384
Answer: A,F


Which three ESP fields can be encrypted during transmission? (Choose three.)
A. Security Parameter Index
B. Sequence Number
C. MAC Address
D. Padding
E. Pad Length
F. Next Header
Answer: D,E,F

What are two default Cisco IOS privilege levels? (Choose two.)
A. 0
B. 1
C. 5
D. 7
E. 10
F. 15
Answer: B,F

Which two authentication types does OSPF support? (Choose two.)
A. plaintext
B. MD5
C. HMAC
D. AES 256
E. SHA-1
F. DES
Answer: A,B

Which two features do CoPP and CPPr use to protect the control plane? (Choose two.)
A. QoS
B. traffic classification
C. access lists
D. policy maps
E. class maps
F. Cisco Express Forwarding
Answer: A,B

Which two statements about stateless firewalls are true? (Choose two.)
A. They compare the 5-tuple of each incoming packet against configurable rules.
B. They cannot track connections.
C. They are designed to work most efficiently with stateless protocols such as HTTP or HTTPS.
D. Cisco IOS cannot implement them because the platform is stateful by nature.
E. The Cisco ASA is implicitly stateless because it blocks all traffic by default.
Answer: A,B


Which three statements about host-based IPS are true? (Choose three.)
A. It can view encrypted files.
B. It can have more restrictive policies than network-based IPS.
C. It can generate alerts based on behavior at the desktop level.
D. It can be deployed at the perimeter.
E. It uses signature-based policies.
F. It works with deployed firewalls.
Answer: A,B,C

What three actions are limitations when running IPS in promiscuous mode? (Choose three.)
A. deny attacker
B. deny packet
C. modify packet
D. request block connection
E. request block host
F. reset TCP connection
Answer: A,B,C

When an IPS detects an attack, which action can the IPS take to prevent the attack from spreading?
A. Deny the connection inline.
B. Perform a Layer 6 reset.
C. Deploy an antimalware system.
D. Enable bypass mode.
Answer: A

What is an advantage of implementing a Trusted Platform Module for disk encryption?
A. It provides hardware authentication.
B. It allows the hard disk to be transferred to another device without requiring re-encryption.dis
C. It supports a more complex encryption algorithm than other disk-encryption technologies.
D. It can protect against single points of failure.
Answer: A

What is the purpose of the Integrity component of the CIA triad?
A. to ensure that only authorized parties can modify data
B. to determine whether data is relevant
C. to create a process for accessing data
D. to ensure that only authorized parties can view data
Answer: A

In a security context, which action can you take to address compliance?
A. Implement rules to prevent a vulnerability.
B. Correct or counteract a vulnerability.
C. Reduce the severity of a vulnerability.
D. Follow directions from the security appliance manufacturer to remediate a vulnerability.
Answer: A

Which type of secure connectivity does an extranet provide?
A. other company networks to your company network
B. remote branch offices to your company network
C. your company network to the Internet
D. new networks to your company network
Answer: A

Which tool can an attacker use to attempt a DDoS attack?
A. botnet
B. Trojan horse
C. virus
D. adware
Answer: A

What type of security support is provided by the Open Web Application Security Project?
A. Education about common Web site vulnerabilities.
B. A Web site security framework.
C. A security discussion forum for Web site developers.
D. Scoring of common vulnerabilities and exposures.
Answer: A

What type of attack was the Stuxnet virus?
A. cyber warfare
B. hacktivism
C. botnet
D. social engineering
Answer: A

2018年4月18日星期三

JuniperのJNCIA認定資格JN0-102攻略問題集試験に合格しますか?

現在、市場でオンラインのJuniperのJNCIA資格JN0-102試験参考書料はたくさんありですけどが、Ktestの試験参考書は絶対に最も良い資料です。KtestのITの専門研究者は認証試験の問題と解答を研究して、受験者にとても有効な訓練試験オンラインサービスツールを提供します。
もし受験者はKtestのJN0-102(Juniper Networks Certified Internet Associate, Junos(JNCIA-Junos))試験問題集を購入したければ弊社が詳しい問題集を提供して、受験者にとって完全に準備します。KtestJuniperJNCIA認定資格の試験問題集を安心に選択して試験に100%合格することができます。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。


JuniperのJNCIA資格を受けてJNCIA資格を取得したいですか。Ktestはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお大切なのは、自分に相応しい効率的なツールを選択することです。KtestのJN0-102試験問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくKtestのウェブサイトをクリックしてもっと多くの情報を読んでください。Ktestは優れたIT情報のソースを提供するサイトです。Ktestで、あなたの試験のためのテクニックと勉強資料を見つけることができます。KtestのJuniperのJN0-102試験問題集は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。Ktestに会ったら、最高のトレーニング資料を見つけました。KtestのJuniperのJN0-102試験問題集を持っていたら、Juniper Networks Certified Internet Associate, Junos(JNCIA-Junos)試験に対する充分の準備がありますから、安心に利用したください。

あなたは100%保証によってバックアップされる材料との最初の試行であなたのKtestのJuniperのJNCIA認定資格JN0-102攻略問題集試験に合格しますか?あなたがオンラインでJuniper Networks Certified Internet Associate, Junos(JNCIA-Junos)試験のために勉強したいですか?もしそうなら、あなただけの最高のJN0-102攻略問題集を得るために最適な場所にあります。私たちはあなたのすべての正解を持って正確なKtestの試験参考書を提供し、この材料は、同様にコスト効果的です。あなたのJN0-102試験に合格することができます。
Share some JNCIA JN0-102 exam questions and answers below.
-- Exhibit --
[edit]
user@router# show | compare
[edit protocols ospf area 0.0.0.0]
- interface ge-0/0/0.0 {
- disable;
- }
[edit protocols ospf]
area 0.0.0.0 { ... }
+ area 0.0.0.1 {
+ interface ge-0/0/0.0;
+ }
-- Exhibit --
Referring to the exhibit, what are two differences between the active and candidate configurations? (Choose two.)
A. The ge-0/0/0 interface was added to the candidate configuration.
B. Area 0 was added to the active configuration.
C. Area 1 was added to the candidate configuration.
D. The ge-0/0/0 interface was added to the active configuration.
Answer: A, C

Topic 1, Volume A
The IP address 10.1.1.1 belongs to which class of IP address space?
A. Class A
B. Class B
C. Class C
D. Class D
Answer: A

Which two statements are true regarding rescue configurations? (Choose two.)
A. Once saved, a rescue configuration is loaded using the rollback 0 command.
B. The rescue configuration must contain the minimal elements necessary to restore network connectivity.
C. A minimal rescue configuration is defined by default.
D. A rescue configuration must include a root password.
Answer: B, D

-- Exhibit --
{master:0}[edit interfaces]
user@switch# show
me0 {
disable;
unit 0 {
familyinet {
address 10.1.1.10/24;
}
}
}
-- Exhibit --
Administrators report that they are unable to access the management interface of the EX Series device shown in the exhibit.
Which command will resolve this problem?
A. delete me0 disable
B. activate me0
C. set me0 unit 0 enable
D. deactivate me0
Answer: A

Which command returns a list of commands in which a given keyword is used throughout the Junos hierarchies?
A. help topic
B. help reference
C. help apropos
D. help tip
Answer: C

Which word starts a command to display the operational status of a Junos device?
A. put
B. set
C. show
D. get
Answer: C

Why is IPv6 packet processing more effective than IPv4 packet processing?
A. fixed header size
B. smaller header size
C. fewer header fields
D. variable header size
Answer: A

Which two statements are true about TCP communication? (Choose two.)
A. The receiver acknowledges the final packet in each communications stream.
B. The receiver adds sequencing numbers to the packets received.
C. The sender adds sequencing numbers to the packets it sends.
D. The receiver acknowledges each packet it receives from the sending device.
Answer: A, C


Ktestインターネットサイトに相関する依頼できる保証が何一つありません。ここで私が言いたいのはKtestのコアバリューです。すべてJuniperのJNCIA資格のJN0-102試験問題集は非常に重要ですが、こんな情報技術が急速に発展している時代に、Ktestはただその中の一つです。では、なぜ受験生たちはほとんどKtestを選んだのですか。それはKtestが提供した試験問題資料は絶対あなたが試験に合格することを保証しますから。なんでそうやって言ったのはKtestが提供した試験問題資料は最新な資料ですから。それも受験生たちが実践を通して証明したことです。

2018年3月19日星期一

2018 Microsoft Azure Developer Specialist 70-532 exam dumps

KtestのMicrosoftのMicrosoft Azure Developer Specialist認定資格70-532(Developing Microsoft Azure Solutions)試験は、専門家、豊富な経験と洞察力テストパターン変化によるアマゾンの蓄積です。どんなにあなたが伝統的な方法によって学ばない、とあなたは試験、あなたが最初に試すアマゾンの認証を渡すことができるかわからない方法。

Microsoftは、主に情報技術の巨人アマゾン認定の専門家を紹介しています。これらアマゾンの審査を経てハードワークと多くの時間を必要とします。任意の圧力の種類が非常に容易であることなく、あなたはMicrosoftが働いていたことを証明することができ、ありがとうございます。質問は今、あなたは簡単にその困難なテストを証明するために役立つ方法です。実際にアマゾンの廃棄物は、実際のテストと特別な質問と回答を提供します。

Ktestの70-532試験参考書を利用してみたらどうですか。70-532試験参考書本語試験に関連するすべての参考書の中で一番優秀なものだと言えます。
Share some Microsoft Azure Developer Specialist 70-532 exam questions and answers below.
You need to meet the performance and scalability requirements. Which SQL Database configuration should you use? 
A. Use the S1 performance level for On-Peak mode. 
B. Use the P2 performance level for On-Peak mode. 
C. Use the S2 performance level for On-Peak mode. 
D. Use the P1 performance level for On-Peak mode. 
Answer: D

Users report that after periods of inactivity the website is slow to render pages and to process sign-in attempts. You need to ensure that the website is always responsive. What should you do? 
A. Add the following markup at line WC14: 

B. Add the following markup at line WC08:

C. Add the following markup at line WC14:

D. In the Azure management portal, enable Always On support for the website.
E. In the Azure management portal, disable Always On support for the website.
Answer: A


You need to choose an Azure storage service solution. Which solution should you choose?
A. Queue storage
B. Blob storage
C. File storage
D. Table storage
Answer: C

You need to debug the website remotely. Which three actions should you take? Each correct answer presents part of the solution.
A. In the Azure management portal, configure a monitoring endpoint.
B. In the Azure management portal, set remote debugging to On and set the Visual Studio version to 2013.
C. Install the Azure SDK for .NET on the computer that runs Visual Studio.
D. In the web.config file for the website, set the debug attribute of the compilation element to true.
E. In the Azure management portal, set the web hosting plan to Standard.
Answer: B, C, D

You need to implement data storage for patient information. What should you do?
A. Use the Update Entity operation of the Table Service REST API.
B. Use the Put Blob operation of the Blob Service REST API.
C. Use the Put Message operation of the Create Queue REST API.
D. Use the Set Share Metadata operation of the File Service REST API.
Answer: A


You need to configure role instances. Which size should you specify for the VM?
A. Use Small for Off-Peak mode.
B. Use Large for On-Peak mode.
C. Use Extra Large for On-Peak mode.
D. Use Extra Small for Off-Peak mode.
Answer: B

You need to move the VM. What should you do?
A. Use the Blob Service REST API
B. Use the Service Management REST API
C. Run the Azure PowerShell Convert-VHD cmdlet.
D. Run the Azure PowerShell New-AzureVMcmdlet
Answer: A

You need to configure the virtual network.What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
A. Configure a point-to-site virtual network.
B. Configure a site-to-site virtual network.
C. Configure a multi-site virtual network.
D. Configure a cloud-only virtual network.
Answer: A, B


KtestはIT認定試験に関連する資料の専門の提供者として、受験生の皆さんに最も優秀な試験Developing Microsoft Azure Solutions試験問題集を提供することを目標としています。他のサイトと比較して、Ktestは皆さんにもっと信頼されています。なぜでしょうか。それはKtestは長年の経験を持っていて、ずっとIT認定試験の研究に取り組んでいて、試験についての多くの規則を総括しましたから。そうすると、Ktestの70-532試験参考書は高い的中率を持つことができます。これはまた試験の合格率を保証します。従って、Ktestは皆の信頼を得ました。


関連試験:


70-533試験:Implementing Microsoft Azure Infrastructure Solutions


70-534試験:Architecting Microsoft Azure Solutions